2.2KW H Beam Shot Blasting Machine

Place of Origin JIANGSU,CHINA
Brand Name YAOQIANG
Model Number GGP1500
Minimum Order Quantity 1 set
Price USD30,000~50,000
Packaging Details standard package
Delivery Time 30 days
Payment Terms L/C, T/T, Western Union
Supply Ability 5set/month
Product Details
Pipe Diameter ≤φ1500mm Pipe Length 6000-15000mm
Pipe Thickness 1.4-22mm Roller Walking Speed 0.5-5m / Min
Reducer Power 2.2KW Reducer Model BWY22-87-2.2kw
Power(w) Customized Condition New
High Light

2.2KW H Beam Shot Blasting Machine

,

22mm H Beam Shot Blasting Machine

,

1.4mm beam shot blasting machine

Leave a Message
Product Description

Adjustable Speed Frequency Control Φ1500mm Pipe Surface Cleaning Shot Blasting Machine

 

Pipe Surface Cleaning Shot Blasting Machine is mainly used for a variety of diameter pipe wall surface cleaning, it can in the original state of the steel surface impose a strong shot blasting, remove the rust on its rust layer and its oxide, so that a certain degree of uniformity of finish Of the metal glossy surface, in order to remove stress, improve the steel surface coating quality and corrosion resistance.

 

In order to ensure the cleaning effect of the workpiece, and the use of the main room roller table was ordered, especially in the main room roller table with high chromium wear-resistant sheath, so you can extend the use of roller table was ordered several times.

 

Technical parameter

1, Workpiece size

Diameter ≤φ1500mm
Length 6000-15000mm
Thickness 1.4-22mm

 

2, Roller conveyor system (adjustable speed)

(1) Enter the roller table

Walking speed 0.5-5m / min
Reducer power 2.2KW
Reducer Model BWY22-87-2.2kw
Roller length 8000mm

 

(2) the output roller

Walking speed 0.5-5m / min
Roller length 8000mm
Reducer power 2.2KW
Reducer Model BWY22-87-2.2kw

 

3, shot blasting machine (frequency control)

Model Q034
Speed 65-70m / s
Shot amount 3 × 200min
Power 3 × 7.5KW

 

2.2KW H Beam Shot Blasting Machine 0

4, hoist

Lifting capacity 36T / h
Power 5.5KW

 

5, the separator

Separation amount 36T / h
Separation area wind speed 4-5m / S

 

6, the vertical screw conveyor

Delivery 36T / h
Power 4kw

 

7, horizontal screw conveyor

Delivery capacity 36T / h

 

8, dust removal system

Dust collector

- Model LT-24
- Air volume 10500m3 / h

 

Centrifugal Fan

- Model 4-72No5A
- Air flow 12500m3 / h
- Wind pressure 2200 MPa
- Power 15kw

 

9, the whole machine power: about 55kw

 

10, the total amount of ventilation: 12500m3 / h

 

11, quality standards

- Surface quality Sa2-Sa3.0 level
- Surface roughness about 15 ~ 50um

 

12, equipment noise (operating area): ≤ 95Db

2.2KW H Beam Shot Blasting Machine 1

 

Working conditions:

The altitude is not more than 1000m;

Ambient air temperature range: -10 DEG C to +40 c.;

Air relative humidity: when the daily average temperature is not more than 25 degrees centigrade, the average relative humidity is 90% in the wettest month;

Grid voltage fluctuation: within + 10% (when the grid frequency is rated)

The grid frequency fluctuation: less than 1% (when the grid voltage rated value).

2, working environment

The equipment shall be placed in an explosive or corrosive industrial gas that does not seriously endanger or affect the normal use of the equipment Steam, salt fog and chemical deposits, and should be away from severe vibration and turbulence occasions