Longitudinal Seam Manipulator Welding Machine Power Pole Inner Rib
|Welding Style||CO2 Gas Shielded Welding||Welder Model||NB-500|
|Condition||New||Equipment For||Pipe,tank,cylinder Inner Or Outside Longitudinal Seam Welding|
|Have Welding Rotator||Self-adjustable Welding Rotator||Rotator Max Load||Custonized|
Seam manipulator welding machine,
Longitudinal manipulator welding machine,
0.75kw manipulator welding
The equipment adopts the pedestal fixation mode, the length of 13000mm's transverse arm is fixed on the base, and the end of the arm is fixed to the welding machine head (including the CO2 gas welding torch, the electric cross adjusting bracket, the tracking wheel mechanism, the video camera monitoring system, etc.);
Fixed counterweight at the other end of the arm can ensure that after the arm is installed, the full length 13000mm arm is basically horizontal and does not affect the effective welding of the longitudinal seam after the workpiece enters.
The arm is too long, in the unwelded state, the lift support column can be used to hold the arm at the 3000mm position of the base, so that the arm can always handle the horizontal state.
The wishbone is finished by special processing technology.
After bending, the inner steel plate is welded, and the inner stiffening plate is crisscrossed to increase the internal stress and rigidity.
After the cover plate is welded by CO2 gas shielded welding, the stress is annealed after welding, and then corrected, leveled and straightened.
|2||Style||Fixing, arm lifting|
|5||Full length of arm||mm||13500|
|6||Transverse arm lifting mode||
Ac motor worm lift guide post
|7||Transverse arm lifting speed||Mm/min||500|
|8||Driving motor power||KW||0.75|
|10||Head cross adjusting trailing plate||mm||50*50|
|11||Trailing plate movement mode||motor-driven|
|12||Nose attachment||Mechanical tracking wheel set|
|13||Transverse arm tail counterweight||KG||500|
The principle of the internal longitudinal seam welding machine is to use a long rod to penetrate into the inside of the power rod.
Through the combination of NB-500 type CO2 gas shielded welding machine and video camera monitoring system, the longitudinal slot (length 12000mm) of the power rod is effectively welded.
Supply range of units into units:
1.Base joint: base, etc.
2.Wish-arm coupling: transverse arm, support column, rear counterweight, etc.
3.Transverse arm lifting mechanism: motor, worm reducer, wire rod lift, guide post, etc.
4.Head accessories: electric cross regulating parts, mechanical tracking wheel, etc.
5.Spare parts: 3 for each fuse, 3 for 5AN1A, 2 for buttons, 10A for fuse
Technical information documents:
(1) the whole machine manual (including electrical principle diagram, gas path diagram, etc.).
(2) Inverter specification, flux recovery specification.
(3) Certificate of eligibility.
(4) list of consignments.
(5) the whole machine foundation and the user self-made products, etc.