60B 80B 60D Automatic H Beam Flange Straightening Machine
|Model NO.||YJZ||Flange Thickness||60mm~80mm|
|Min Web Height||350mm||Speed||6.56m/min|
|Transport Package||Wooden Case, Steel Frame||Voltage||220-415V|
|Flange Width||200~800mm/1000mm||Material Of Plate||Q235/q345|
Automatic H Beam Flange Straightening Machine,
60D h beam flange straightening machine,
80B h beam production line
60B/80B/60D Automatic H-Beam Flange Hydraulic Straightening Steel Making Machine
The machine is used for straightening the deformation of steel H beam web and flange. Mechanical and hydraulic types are optional for customers.
The mechanical type HYJ-60B and HYJ-80 has simple structure, and is simple and stable for operation. The hydraulic type YTJ-60B and YTJ-80 has big straightening ability, wide range, high automation standard, and is the national initiate. The straightening wheel and active roller are made from good quality alloy steel, which has been heat treated well, thus ensure long working life.
The main transmission system is with 22kw big motor and cycloidal pin wheel reducer. It is high efficient and works fast.
All the parts in it has been straightening treated.
There is near control operation box on the main engine, so it is easy to operate.
|Thickness||≤ 20mm||≤ 40mm||≤ 60mm||≤ 80mm|
|Tensile strength of flange||≤ 420Mpa||≤ 420Mpa||≤ 600Mpa||≤ 600Mpa|
|Web height||≥ 160mm||≥ 350mm||≥ 350mm||≥ 500mm|
|Power of machine||9Kw||14Kw||37Kw||44Kw|
1. Equipment structure types: Stationary;
2. The correct form: Mechanical or hydraulic;
3. Equipment usage: Simple structure, convenient operation, capacity, correct speed, high degree of
4. Correction: High quality alloy wheel material after heat treatment, surface hardness and endurable
5. Electrical system: The cabinet control.
Main structure: base, the left and right frame, motors, reducers, straightening wheels, press rollers, guide rollers and etc.
Inlet and outlet table roller: each 2.6m*4m
Electric control system: control cabinet, control box and accessories.
Spare parts: 1 set.
1. Our company's production equipment is suitable for relevant national standards and corporate standards.
2. Our company's products meets the technical requirements, and the parameters should be listed in the manual to ensure safety and reliability.
3. Company can send engineers to the demand side to participate and assist in the installation and commissioning of the equipment until the machine is qualified and put into use. We can also help the demand side train equipment operators and maintenance personnel. (Note: For the installation and commissioning of foreign equipment, we will charge according to the internationally accepted standard cost)
4. The equipment is guaranteed for 1 year. During the warranty period, the company can track service and maintenance.