Z18 H Beam Welding Machine 200-800mm With Manual Or Automatic Spot CO2 Welder
|Web Height||200-2000mm||Flange Width||200-800mm|
|Material Length||4000-15000mm||Assembly Speed||0.5-6m/min|
|Advantage||Cheap And Effective||Power Supply||AC380V, 50HZ, 3Phase|
Z18 h beam welding machine,
800mm h beam welding machine,
200mm beam assembly machine
PLC Control H-Beam Assembly Machine with manual or automatic spot CO2 welder
H-beam assembly machine can realize the web and flange assembly by automatic CO2 tack welding. Web and flange centering and clamping units fix the beam first, and then the PLC controlled CO2 welders weld the beam. Main machine is driven by A.C. inverter, stable and reliable. Upper press-beam is guided through left and right four rails, ensuring steady clamping of long time use.
2. Main Parameters
*We reserve the right to alter specifications without prior notice.
3. Main features
The standard models of our H-beam automatic assembling machine have the following features:
Robust all steel fabrication with stable structure and good rigidity, and no deformation after long time using;
Synchronous clamping and centering system for web and flange;
Automatic tack welding system;
Tangshan Panasonic KRII-350 CO2 welding system;
Japan Mitsubishi PLC controller;
Separate motor for main machine and driving conveyors;
Heat treatment to main welding parts after welding; sand blasting treatment to main welding parts before painting;
All motion parts have lubrication system;
Main electric elements are ABB/Siemens brands;
Web height: 160-1500/1800/2000mm
Web thickness: 3-40
Flange width: 160-800mm
Flange thickness: 6-40mm
Workpiece length: 4000-20000mm
Assembly spped: 0.5-6 m/min
Electrical assembly: the brand is AC converter
Total power: 10KW
Power supply: AC 380V 50HZ 3phsaes
Z15 H beam assembly machine
This machine is mainly composed of the following parts:
|1. the main engine assembly,|
|2. pull rod on the system,|
|3. the input roller,|
|4. output roller,|
|5. hydraulic system assembly,|
|6. electric control system.|
|the main drive roller (2 groups),|
|the web clamp system (2 groups),|
|the wing plate clamping system (3 groups),|
|lifting the main compression beam,|
|H type steel alignment part.|
a) the main drive roller
b) web clamping system
c) wing plate clamping system
d) main lifting compaction beam
e) H steel partially aligned
Rod on the system (two groups)
Input and output rollers
Hydraulic system assembly
Suitable workpiece`s size:
|Assembly spped||0.5-6 m/min|
|Electrical assembly:||the brand is AC converter|
|Power supply||AC 380V 50HZ 3phsaes customized|
Scope of supply and composition
-the main engine assembly, web clamp, flange plate clamping, etc..
B.input and output roller assembly:
-roller of 2.6m/ * 6 festival festival, rod system etc.
-pump station, oil motor, high pressure hose, hydraulic cylinder, etc..
D. automatic spot welding system:
-350A CO2 welding power source*2pcs.welding, mechanical tracking mechanism, the hydraulic cylinder clamping mechanism etc. (manual welding without the equipment, automatic welding).
E.electric control system:
-electric cabinet, AC inverter, etc..
-O button 3. The HH54PDC24V relay 2. The molten core 4A, each 3 6A.
Instructions for the use of the complete machine (including the electrical principle diagram, hydraulic principle diagram, wearing parts list, etc.)
Frequency converter using manual, hydraulic pump station manual
Equipment qualification certificate
Production and self owned part
A. Foundation (provided by the supplier).
B. anchor bolts and expansion bolt.
C. machine foundation.