5mm CNC End Face Milling Machine For H Beam Box Beam With Hydraulic Support Rack Automatically Clamp
|Model||DX1622||Milling Work-piece Height||1600mm|
|Milling Work-piece Width||2200mm||Max Milling Depth||5mm|
|Horizontal Feed Rate||90~960mm/min||Fast-back Speed||660mm/min|
|Vertical Feed Rate||200～650mm/min||Cutter Diameter||￠200|
CNC End Face Milling Machine,
5mm End Face Milling Machine,
5.5KW cnc face milling
CNC End Face Milling Machine For H Beam Box Bem With Hydraulic Support Rack Automatically Clamp
DX series end milling machine, generally can be divided into end milling machine host part and workpiece clamping table part. Users can order according to the actual situation.The machine is easy to operate, simple structure, rapid adjustment, etc., is the steel structure processing and related products production and processing of one of the necessary equipment.
DX1622 End Milling machine
|Technical parameters||Processing range||1600*2200mm|
|Machine tool dimensions||4600×1200×3740|
|Horizontal transmission||Motor power||5.5KW|
|Working speed||50 ~ 440mm/min|
|Fast retreat speed||660mm/min|
|Vertical transmission||Motor Power||1.5KW (corresponding speed is 1500rpm)|
|Moving speed up and down||55-500 mm/min|
|Mill pin head||Model||TX32A|
|Motor Power||7.5KW (corresponding speed is 1420rpm)|
Introduction to the structure
H beam box beam CNC PLC End face milling machine is mainly composed of horizontal drive, horizontal slide, vertical drive, vertical rotary slide, electrical control system and other five components.
It consists of bed body, horizontal feed motor, reducer, horizontal drive screw and screw mother, etc. The bed is welded, annealed, roughened and finished.
Its characteristics are: high strength, small deformation, reasonable structure, good technology.
A rectangular guide has large carrying capacity and a V-shaped guide has high guiding accuracy.
The horizontal transmission mechanism is composed of feeding box, trapezoidal screw driving pair and bearing.
The feed box motor adopts a two-speed motor, which is used for horizontal feed and horizontal fast-forward and fast-backward respectively in the milling process.
The screw drive adopts the main screw driver and the main screw driver respectively to ensure the horizontal drive accuracy.
At the same time, the two wires are fixed on the nut base, which is connected with the horizontal slide table, thus driving the slide table to reciprocate horizontally along the guide way.
Electrical control system
The electrical control system is mainly composed of an electrical control box and an operating system