380V Shot Blast Cleaning Equipment 220V High Pressure

Place of Origin Jiangsu China
Brand Name yaoqiang
Model Number HP1020
Minimum Order Quantity 1 set
Price US $30,000-100,000/ set
Packaging Details standard packing
Delivery Time 20 days
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 20 sets/month
Product Details
Clean Type High Pressure Cleaner Cleaning Process Shot Cleaning
Customized Yes Machine Type Sandblaster
Working Current 220V Or 380V ±10% AC,customized Installation On Site Installation At Customer
High Light

380V shot blast cleaning equipment


220V shot blast cleaning equipment


High Pressure shot blasting equipment

Leave a Message
Product Description

Automatic H Beam Steel Roller Conveyor Shot Blasting Cabinet Equipment Machine Wholsale


Pass-through type shot blasting machine is used for cleaning of steel plate, steel structure and profile. This kind of shot blasting machine not only remove the scale and dust during welding, but also can enhance workpieces fatigue resistance, reaching the purpose of improving the inner and surface quality of steel plate.


Model (can be customized) HP1020 HP1240 HP1450
Workpiece dimention section length*width (mm) 1000*2000 1200*1400 1400*52000
length (m) 12 15 15
Quality standard surface cleaness A-BSa2-Sa2½ A-BSa2-Sa2½ A-BSa2-Sa2½
shot-blaster number (pc) 8 8 8
power (KW) 8*11 8*11 8*15
inlit and outlet conveyor loading capacity kg/m 200 1000 1000
convey speed (m/min) 0.5-5 0.5-5 0.5-5
circulation quantity (T/h) 120 120 120
Overall power (kw) 125 140 175
pit depth (m) 1.9 1.9 1.9
main frame length*width*heigh (mm) 6770*2900*3150 7895*2985*3460 7895*3200*3760



Conveyor system
It consists of loading and unloading rollers, chamber rollers, connecting rollers.
Rollers in the blasting cabinet are protected by special alloy jacket with lifetime over 4,000 hours.
Conveyor system is driven by motors with inverter. Rollers can be controlled manually and automatically.
Step-less speed is available. Roller conveyor could move in step with the whole machine or move faster.

Blasting chamber
In the blasting chamber, the wall is protected by SPMn13 material liner and 65Mn protective liner, which has high wear resistant performance. Chamber inside protection plate all adopt the high strength nut fixed and pressure on the inner of blasting chamber, easy tear open outfit replacement. Prolong service life, reduce the cost and reduce maintenance frequency. The steel abrasive fall down freely and collected by screw conveyor.

Screw conveyorScrew conveyor consists of cycloid needle wheel decelerator, screw axis, conveyor shell, bearing, etc. It is a standard conveying device and an important part of abrasive circulating system. The screw blade is made of 16 Mn.This unit is responsible for conveying the abrasive to the elevator. Screw conveyor located at the bottom of shot blasting chamber, the spiral blade welding in the drive shaft. Conveyor motor drives screw conveyor to send abrasive to discharge outlet, then the mixed abrasive will be conveyed to elevator bottom. On both ends of the screw conveyor adopt triple seal protection. the abrasive and dust will drop to
the clearance between end plate and bearing once leak out, will not enter the bearing. Screw conveyor shaft with sensors detecting unit can detect the working state.

380V Shot Blast Cleaning Equipment 220V High Pressure 0


380V Shot Blast Cleaning Equipment 220V High Pressure 1
Main technical performance of HP1020 shot blasting macine

Project Work unit Numerical
Cleaned workpiece dimensions Length mm ≤10000
Width mm ≤800
Du Gao mm ≤1600
Shot blasting machine through the door (width x height) mm 1000 ×2000
Transmission frequency range m/min 0.5 ∽3.0
After descaling the surface roughness   Sa2.5
    Motor, reducer Domestic high quality reducer
Electrical components Zhengtai electrical appliance and domestic quality instruments, meters, brand wire and cable
Pneumatic control system Pneumatic components Domestic quality components
Host size Length x width x height mm ≈5500*1200*2600 (Without filter)
[Deep Foundation 1800](For reference only)
Using environment Factory voltage:320V±10% 50HZ±1HZ
Ambient temperature:-15~40ºC
Relative humidity:85% ≤

Blasting performance parameters

Project Work unit Numerical
Shot blasting Chamber Length x width x height mm 1500*1200*2600
Thickness of plate mm 8
Wear-resistant trim material High chromium cast iron mm Thickness:12
Qian attached to a sealed room Length x width x height mm 2000*1200*2600
Thickness of plate mm 3.5
Structure of wear-resistant curtains   Wear-resistant rubber sheet
Wear-resistant rubber sheet mm 10
Shot blasting machine Model   Q034
Single shot blasting kg/min 220
Single power kw 11
The number of Generic classifier 8
Blade life Hour 400-600
Projectile First mount kg 3000
Diameter mm φ1.5
Hardness HRC HRC 40-45
Sand loop
Vertical screw conveyor Lose pill weight T/H 110
Screw diameter mm 320
Power kw 5.5
Horizontal spiral
Lose pill weight T/H 110
Screw diameter mm 320
Power kw 4
Sand separator Power kw 4
Type of separation   Full curtain flow-screen
Wind speed m/s 4-5
Scoop type hoisting machine Power kw 7.5
Lifting amount T/H 110

Transmission parameters

Project Work unit Numerical
From mm 950
Load T/m 0.8
Transmission mode Plate chain interconnect
Blast cabinets parts Here metres 5.5
Conveyor parts Here metres 10
Output section Here metres 10
Drive motor Adjustable-speed motor Kw 3*2

Dust removal system

Project Work unit Numerical
Dust removal system Composed of baghouse dust collection system
Bag dust catcher model   Fsc-48
Bag material   Industrial felt
Bag number Generic classifier 96
Fan model   4-72No5
Fan power kw 7.5kw*2
Total pressure Pa ≈Max2056
Air volume The total air volume m3/H ≈Max14000
Dust removal efficiency % 99.9
Low noise dB ≤85
Dust concentration mg/ m3 ≤65

380V Shot Blast Cleaning Equipment 220V High Pressure 2