-
H Beam Assembly Machine
-
H Beam Straightening Machine
-
H Beam Welding Machine
-
3 In 1 H Beam Welding Line
-
H Beam Shot Blasting Machine
-
Box Beam Production Line
-
CNC Plasma Flame Cutting Machine
-
Cantilever Welding Machine
-
CNC Drill Machine
-
Iron Worker Machine
-
Shearing Bending Machine
-
End Face Milling Machine
-
Welding Rotator
-
Welding Manipulator
-
Welding Positioner
-
Welding Robot
Double Cantilever Submerged Arc Welding Machine Automatic For Box Beam Production Line
HS | 8468800000 | Welding Speed | 0.15-1m/Min |
---|---|---|---|
Web Height | 200-2000mm | Flange Width | 200-800mm |
Effeciency | Two Pieces Of Work-Piece Welded In One Time | Electrical Control | Main Control Cabinet + Remote Control Box |
Web Height | 200-1500mm | Welding Torch Return Speed | 3m/min |
Voltage | 380/415V | OEM | Yes |
Exported To | India,Russia,Pakistan,South Africa,etc | ||
High Light | Double Cantilever Submerged Arc Welding Machine,Submerged Box Beam Arc Welding Machine,Automatic Submerged Arc Welding Machine |
Production Description
Horizontal Line Main Features
1.Only need to spot welding at two terminals of the work-piece (without the full-length spot welding of whole work-piece), then it can enter the next step-- weld. The assembly welding machine will weld the three "loose plates" after positioning, greatly increase the efficiency.
2.With the horizontal placement of work-piece (web horizontal, flange vertical) and the welding mode of work-piece moving, two seams can be welded simultaneously to reduce the distortion of work-piece caused by welding heat.
3. Equipting AOTAI welding(Lincoln is avaiable) power source to achieve single-arc double-wire welding, using 1.6mm welding wire, welding speed can be up to 1.2 m / min, good weld formation, beautiful appearance
4. Due to the automation degree of the production line is much higher than that of the traditional production line, it can reduce the labor intensity of workers and reduce the number of operators. The production line only needs 4-5 operators to produce normally.
5. available for H Beam with variable cross section ≤ 8 °
Model | LHA | |||||
Rail span mm | 4000 | 5000 | 5500 | |||
Controller position | Middle | Side | Middle | Side | Middle | side |
Web height mm | 160-1200 | 160-1500 | 160-2000 | 160-2300 | 160-2200 | 160--2500 |
Flange width mm | 140-800 | |||||
Job length mm | 4000-15000 | |||||
Welding speed mm/min | 240-2400 | |||||
Machine power kW | 9 | 9.7 | ||||
Power supply | AC380V, 50HZ, 3P or tailor made | |||||
Above are our standard models and parameters, and it can be designed and manufactured on request. |